Radar target simulator
Radar Target Simulator – fixed distance
AMG043-006B
- Designed to simulate speed and distance under safe conditions
- Independent from all radar modulations (pulse, CW, FSK, FMCW)
- Accurate and high performing
The RTS AMG043-006B creates a calibrated echo at a given distance for a programmable rate. The response is continuous or pulsed at a rate of 3 s ON and 3 s OFF.
The 12 V powered version can be supplied as a stand-alone unit in a carrying case for installation checks.
- Simulation of a distance in the range of 2.5 m to 1000 m with an accuracy of 0.5m
- Programmable direction of travel
- Continuous or ON/OFF simulation
- Speed in m/s, km/h and mph
- Speed from ± 800 Km/h
- SER from -20 dBm² to +40 dBm² (to be defined)
12 V, 12 W
The AMG043-006B simulator generates a delayed Doppler signal. The signal amplitude is fixed, the Doppler frequency is programmable in steps of 1Hz up to 30kHz. Setting up the simulation parameters is done with a computer using the easy to handle software provided with the device.
The distance is simulated by a coaxial delay line of 10m. The Radio Cross Section (RCS) can be calculated by using the technical characteristics of the simulator and the mesuring distance, as follows:
Ds: distance between the simulator and the radar (m) 
Dr: distance between the radar and the target (m)
Lambda: wavelength (m)
Sigma: RCS (m2)
Gse: radar emission antenna gain
Gsr: radar reception atenna gain
Gs: simulator gain including cable losses
- Metrological control and approval of 24 GHz radars
- Calibrated SER simulation
- Test bench for K-band radars (24 GHz)
- Verification of speed measurement equipment (except multi-target radars)
- Verification of radar in production and on site
