Security

Bluetooth® connection is available for all Hekleo-2XS racons. The Bluetooth dongle is plugged into the serial link connector. The Android application can be downloaded for free from Google Play.

Bluetooth® improves the safety of checking radar warning buoys: complete, safe diagnosis without the risk of connecting and disconnecting cables. It can download 2 days of data stored in the racon.

The AMG0111 Bluetooth® dongle and application allows safe preventive maintenance!

The radio link simplifies the connection, no more problems with laptops, tablets and other connecting cables!

The effectiveness of the green-reward system is improved by measuring the speed of vehicles ahead of the light. When a vehicle arrives too fast, the time to green is increased by an additional time to force the driver to stop at the light.

This speed control reinforces the pedagogical character of the system.

This radar is specially set up for a good operation of the reward light. Its high sensitivity allows a detection well beyond the “reward” zone, but also at the foot of the light.

Traffic management is carried out in the best possible way: turning green for vehicles arriving below the speed limit, detection of vehicles that have missed their green light or coming from nearby areas.

The radar can also indicate the presence of a vehicle in the area to prevent a lane exit.

The AMG040-006 is a compact and high performing microwave sensor operating in the 24GHz frequency range which is perfectly suited to speed monitoring. It uses the Doppler effect to detect the presence of moving targets, determine their motion direction and measure their speed. This reference is designed to detect speeds between 1.5 km/h and 100 km/h.

It can be installed next to the road to measure the speed of passing veicles or on board to measure the displacement. Thanks to its advanced radar signal processing features it is capable of delivering speed measurements and identify the motion direction after just 30 cm of displacement when used on board. 

This sensor is also suited to speed or vehicle activated displays, presence or movement detection (trigger video/photo monitoring systems) and contacless automation applications.

The RACON system (RAdar beaCON) is a radar transponder intended for maritime navigation. It captures the transmission frequency of a ship’s radar and responds on the same frequency using a Morse type code. This beacon is used to identify an obstacle or a hazard.

Compliant with IOM and IALA recommendations, the RACON HEKLEO-2 XS operates on S (2.9 – 3.1 GHz) and X (9.3 – 9.5 GHz) bands to provide essential service in all weather conditions.

The AMG0086 radar is the development platform for your future radar applications. Using a user-friendly interface, you will be able to develop your product in record time. This 3D radar can be configured with the most used modulations. It comes with an antenna system adapted to your project.

This equipment is more than an evaluation board: it is intended for field installations and it complies with the regulations.

Checking a radar requires a lot of measuring equipment. Radars are more and more complex and efficient, basic simulators are no longer able to deceive them.

At the request of its customers, AMG has developed a real tool for verifying and controlling the performance of radars that operate at 24GHz.

AMG043-0013 radar tester checks radar frequency, power, sensitivity. Test sequences can be programmed in the laboratory and then they can be replayed in the field. The great dynamics of operation, makes it possible to carry out tests at several meters. The significant autonomy and their recharging via the USB connector ensure use without surprises.

The AMG043-013 is the essential tool in all phases of the life of 24GHz radar equipment: design, manufacture, installation and maintenance!

The AMG061-002 is a compact Doppler radar which operates in the 24 GHz K-band. It is a low-power sensor designed to offer exceptional detection performance and versatility for diverse traffic management applications. 

This cost-effective sensor is well suited for battery and solar-powered uses. It has a fast-sleep/fast-wakeup function that allows two different radar processing consumption modes. One with a current of 89mA (@ 12V) when targets are detected and speed/distance measurements are carried out and, the other drawing 29mA (@ 12V) when there are no Doppler signals received which ensures low power consumption overall

The AMG049-003 is ideal for measuring speed with minimal energy consumption. It is a compact, cost-effective and versatile Doppler sensor working in the 24 GHz frequency band which can be easily integrated into vehicle activated displays, traffic counting units or speed performance measuring systems.  

This reference is very well suited to both battery and solar-powered uses. Its unique radar signal processing design ensures outstanding detection performance and sensitivity at a very low current (13mA @ 12V), while also making unnecessary to program stand-by cycles to ensure low-power consumption throughout. 

Like all sensors in our catalogue, the AMG049-003 is available as OEM part or enclosed in a polycarbonate cover. 

The AMG043-010 is an advanced radar target simulator designed to recreate precise and complex speed simulation scenarios for radar equipment in the 24 GHz band. This device can generate electronic echoes from 2.5m to 250m. These echoes can be static or move with speeds between 0.1 km/h to 800 km/h.

Its easy to handle set-up software allows users to create multiple simulation scenarios such as acceleration and deceleration manouvres, as well as recall those parameters already registered countless times. This RTS is the ideal tool to develop radar equipment and to verify the latest generation of speed enforcement radars (multi-lane, target tracking). 

The RTS AMG043-006B creates a calibrated echo at a given distance for a programmable rate. The response is continuous or pulsed at a rate of 3 s ON and 3 s OFF.

The 12 V powered version can be supplied as a stand-alone unit in a carrying case for installation checks.

The AMG043-005 is a precise and multifunctional simulator designed to calibrate and verify all types of radar equipment in the 24 GHz frequency band. It simulates 1 target and can be used to verify the speed, motion direction, sensibility and detection distance of the radar under test. 

This device is essential to do end of line quality control for radar equipment as well as to adjusting and developing radar based products. 

Checking the performance of the simulator is very simple. 

This transceiver is a small-sized Doppler module which operates in the K-band at 24 GHz. It is a cost-effective solution designed to deliver great versatility and outstanding detection performance for low cost applications such as smart lighting controls, door opening sensors, movement detectors and automobile blind spot or anti-collision systems. 

The AMG0091 is suited to both CW and FMCW radar modulations. 

The AMG0092 is a high-tech and robust circuit board with advanced radar processing features. It is a highly versatile product designed to deliver precise speed and distance measurements and to detect the direction of movement in a well-defined area. 

This board can be coupled with our transceiver AMG0091 for a cost-effective solution to complex radar processing requiements, which provides outstanding detection performance for diverse applications from smart lighting and door sensors to obstacle detection and anticollison systems. 

Its open collector type outputs can be used to control relays or alarm systems. Data on speed and distance measured, as well as on the direction of movement can be recovered via serial communication bus. 

The DOS026 consist of an amplifier and a high stabilty frequency source which are controlled by a signal processor. Its internal or external frequency reference is 10MHz. 

This device is designed for the most demanding instrumentation applications particularly those which require high performance, reliability and long product life. 

AMG designs and manufactures antennas for many applications. Printed antennas are usually associated with electronic circuits. The antennas can be single or multi-beam, or agile if combined with MIMO receivers and transmitters.
AMG072 antennas are single beam antennas. They have a narrow bandwidth, but are very thin. They can be connected to the 3D radar.